WarP
Motor Specifications
Motor Comparison Chart
Motor Safety Information |
Motor Comparison Chart - Limits and Selection
Information †
|
Motor
|
Max Recommended Vehicle Weight (lbs, kg)
|
Cont. RPM
|
Redline RPM |
Max Voltage |
Comments
|
|
TransWarP 7
|
1500 *, 680 *
|
5500 |
7800 |
170V |
For extremely lightweight direct drive
vehicles or coupled with additional motor.
|
|
ImPulse 9
|
3400, 1542
|
3500
|
5500
|
170V
|
Good choice for average size cars where
WarP 9 will not fit.
|
|
WarP 9
|
3600, 1633
|
3500
|
5500
|
170V
|
Very common motor in average cars and
very lightweight trucks.
|
|
TransWarP 9
|
1800 *, 816 *
|
3500
|
5500
|
170V
|
For lightweight direct drive vehicles or
coupled with additional motor. Great choice for racing
applications with second motor.
|
|
WarP 11
|
4400, 1996
|
3000
|
5000
|
170V
|
For heavier vehicles with transmission.
|
|
HV 11
|
4400, 1996
|
3000
|
5000
|
288V
|
Higher voltage version of WarP 11. Has
interpoles.
|
|
TransWarP 11
|
2200 *, 998 *
|
3000
|
5000
|
170V
|
For light direct drive vehicles or
coupled with an additional motor for extreme torque.
|
|
TransWarP 11 HV
|
2200, 998
|
3000
|
5000
|
288V
|
Similar to TransWarP 11 and HV 11.
|
|
WarP 13
|
7000, 3175
|
3000
|
5000
|
170V
|
For heavy vehicles or where massive
torque is required.
|
† These values should be viewed as guidelines
only. They might not apply in all situations. Designers are
responsible to ensure that motors are properly chosen for their
intended application. EV Source LLC will not assume responsibility
from damage arising from use of this general information.
* Indicated value is without a transmission, i.e. "direct-drive"
Motor Comparison Chart - Performance
Characteristics
|
Motor
|
Torque
@ 300A
(ft-lbs, Nm)
|
~ Torque
@ 1000A
(ft-lbs, Nm) †
|
~Torque
@ 1400A (ft-lbs, Nm) †
|
|
TransWarP 7 *
|
42.8, 58.3
|
169, 229
|
240, 325
|
|
ImPulse 9 *
|
38.7, 52.5
|
172, 233
|
248, 336
|
|
WarP 9 &
TransWarP 9
|
59.3, 80.4
|
237, 321
|
339, 460
|
|
WarP 11 &
TransWarP 11
|
74.3, 100.7 |
320, 434
|
460, 624
|
|
HV 11 and
TransWarP 11 HV
|
74.0, 100.3
|
291, 395
|
415, 563
|
|
WarP 13
|
100.9, 136.8
|
440, 597
|
640, 868
|
† Torque values in this column are extrapolations
from actual measured data at lower currents. They are intended for
reference only and not as actual performance data. The exception to
this is the torque value shown for the WarP 13, which is from actual
dyno testing.
* A careful review of the listed torque values would raise the
question of why the TransWarP 7 shows nearly the same torque value
as the ImPulse 9, a larger diameter motor. The ImPulse 9 has a very
short armature stack (~4.5"). The 7" motor was designed to produce a
lot of torque for it's size and it has a VERY long armature stack
(~7.5"). The 7" motor (16.62") is also much longer than the ImPulse
9 (13.6"). The 7" motor produces the torque at a lower RPM than the
ImPulse 9. This is true across all the motors we carry. As the motor
size increases, the torque capability increases and the RPMs drop.
Motor Comparison Chart - Basic Parameters
|
Motor
|
Max Diameter (in, cm)
|
Length (in, cm)
|
Weight (lb, kg)
|
|
TransWarP 7
|
7.41, 18.82
|
22.69, 57.63
|
110, 50
|
|
ImPulse 9
|
9.25, 23.50
|
17.07, 43.36
|
133, 60
|
|
WarP 9
|
9.25, 23.50
|
20.19, 51.28
|
143, 65
|
|
TransWarP 9
|
9.25, 23.50
|
24.23, 61.54
|
150, 68
|
|
WarP 11
|
11.45, 29.08
|
21.84, 55.47
|
223, 101
|
|
HV 11
|
11.45, 29.08
|
21.84, 55.47
|
223, 101
|
|
TransWarP 11
|
11.45, 29.08
|
25.26, 64.16
|
230, 104
|
|
TransWarP 11 HV
|
11.45, 29.08
|
25.26, 64.16
|
230, 104
|
|
WarP 13
|
13.25, 33.66
|
24.95, 63.37
|
367, 136
|
|
